2024 Ktm 500 Exc-F Stabilizer Kit

More Stabilizer Kit Options!

Frame Bracket only (Bolt-on Sub mount)  
(P/N: FBD-6125)
$175.00
Damper Manual - Mounting Instructions

FBD-6125FBD-6125
FBD-6125This new design frame bracket consists of three parts. on most models, installation is done without removing the top triple clamp. Models equipped with a factory steering lock will require the locking device to be removed as it will not clear the damper mounting components. Removal of the steering lock does require the triple clamp to be taken off and then re-installed. Due to the many possible options on the market for mounting the Scott's Steering Damper to the triple clamp, additional components may be required with the frame bracket purchase. Please contact Scott's for details. Tower pin and collar are included in the price of the frame bracket.


The Scotts Stabilizer can be mounted using either the bolt-on frame bracket or the weld-on tower, depending on the user's needs. Shown here is the bolt-on bracket which is for those who just don't want to weld, or don't have the facilities to do so. Most bolt-on brackets have extensive detail machined into the underside to match all the curves and bends of the late model complex frames, both aluminum and steel. The bolt-on "fit" can vary from bike to bike depending on how much frame the factory actually gave us to work with. Most are very simple to install, but should you have any questions, we are here to help you. Each frame bracket purchase includes the floating stainless steel tower pin. The Photo attached here may be a generic photo to show you the basic component(s) in the kit, but may not be showing the exact part(s) for your specific bike. (We do not make any weld-on brackets for aluminum framed models, only steel framed bikes).