Husqvarna FX Stabilizer Photos | Scott's Performance

This shows the RUBBER SUB mount, (Stabilizer Under Bars). The rubber mounting system defuses vibration and rider fatigue by incorporating flexible rubber mounts as part of the handlebar clamps while at the same time housing the stabilizer. This mounting system raises the bars approximately 23mm and positions the stabilizer under the bars allowing more room for other items on the bars and the adaption of a standard bar pad, if so desired. The complete kit includes the sub mount, extra different-density cones, stabilizer, link-arm, frame bracket, tower pin, all necessary hardware, plus detailed instructions for easy installation. The cable guide in this photo is optional, not included in the basic kit, but can be purchased online here, if desired. This photo may not be your exact model but depicts the same configuration.

Shown here is the RUBBER-MOUNTED-SUB-KIT. This kit is designed to be used with the stock triple clamps and oversize handlebars. The SUB mount shown here in black, bolts to the stock triple clamp and is rubber mounted. This kit turns your solid mounted stock triple clamp into a vibration-absorbing rubber mounted handlebar, while incorporating the SUB mounted stabilizer to slip in under the bars. Your model may have Black or Silver triple clamps depending on the year and model. The SUB mount utilizes the most popular handlebar position #3. Step by step pictured instructions are included along with all the necessary hardware. Standard diameter bars can be used in some cases but would require our Bar Reducers which are available here, on line, as an option, if needed. The cable guide and large knob in this photo are optional and not part of the basic kit.

This shows the solid type SUB mount, (Stabilizer Under Bars), mounted on the stock triple clamps. The solid sub mount bolts to the stock triple clamps and utilizes the stock handlebar clamps. This mounting system raises the bars approximately 23mm and positions the stabilizer under the bars allowing more room for other items on the bars and the adaption of a standard bar pad, if need be. The complete kit includes the stabilizer, link-arm, frame bracket, tower pin, all necessary hardware and detailed instructions for easy installation. If lower bars are desired, they can be purchased online here. Picture may not be your exact model but depicts the same configuration.

Shown here is the RUBBER-MOUNTED-SUB-KIT. This kit is designed to be used with the stock triple clamp and oversize handlebars. The SUB mount shown here in black, bolts to the stock triple clamp and is rubber mounted. This kit turns your solid mounted stock triple clamp into a vibration-absorbing rubber mounted handlebar, while incorporating the SUB mounted stabilizer to slip in under the bars. Your model may have Black or Silver triple clamps depending on the year and model. The SUB mount utilizes the most popular handlebar position #3. Step by step pictured instructions are included along with all the necessary hardware. Standard diameter bars can be used in some cases but would require our Bar Reducers which are available here, on line, as an option, if needed. The cable guide and large knob in this photo are optional and not part of the basic kit.

This shows the RUBBER SUB mount, (Stabilizer Under Bars), mounted on the stock triple clamps. The rubber mounting system defuses vibration and rider fatigue by incorporating flexible rubber mounts as part of the handlebar clamps while at the same time housing the stabilizer. This mounting system raises the bars approximately 23mm and positions the stabilizer under the bars allowing more room for other items on the bars and the adaption of a standard bar pad, if so desired. The complete kit includes the sub mount, extra different-density cones, stabilizer, link-arm, frame bracket, tower pin, all necessary hardware, plus detailed instructions for easy installation. The Bars, cable guide and large knob in this photo are all optional, not included in the basic kit, but can be purchased online here, if desired.

This shows the SUB mount, (Stabilizer Under Bars), mounted on the 5-star rated, SCOTTS/BRP billet triple clamp. The new triple clamp incorporates rubber bar mounts to reduce vibration and rider fatigue. This mounting system raises the bars approximately 23mm and positions the stabilizer under the bars allowing more room for other items on the bars and the adaption of a standard bar pad, if need be. The complete kit includes the new billet 5-star triple clamp, stabilizer, link-arm, frame bracket, tower pin, all necessary hardware and detailed instructions for easy installation. The handlebars pictured are not included in the kit but can be purchased online here, if so desired.

This shows the solid type SUB mount, (Stabilizer Under Bars), mounted on the stock triple clamps. The solid sub mount bolts to the stock triple clamps and utilizes the stock handlebar clamps. This mounting system raises the bars approximately 23mm and positions the stabilizer under the bars allowing more room for other items on the bars and the adaption of a standard bar pad, if need be. The complete kit includes the stabilizer, link-arm, frame bracket, tower pin, all necessary hardware and detailed instructions for easy installation. The handlebars pictured are the stock bars, but if lower bars are desired, they can be purchased online here. Picture may not be your exact model but depicts the same configuration.

2017–2022 Husqvarna FX 350